Terminus 5 “Impalement Pack” For DS 4.11+
Terminus 5 “Impalement Pack” For DS 4.11+
Terminus 5 ads a new level of punishment with this comprehensive set of impalement items for you favorite girl.
Gallow for Impalement: This is a simple platform with a slotted trap door and control lever. It also has 3 morph adjustable steps to step up to the platform. The slot allows you to place one of the Impaler figures under your character. This platform can be attached to any wall you desire or you can attach it to the Wall 1 figure that is provided in this package.
Impale Pole Mount: This is a simple floor mounted base that can be used to add the 3 different impaling pole smart props to. This mount can be used as a stand alone or combined with the Pole Mount Slot figure.
Impaler 1: This is a creative implament pole design. It can be laid flat on the ground, have your character placed on the pole, then have the pole lift up to beging the impalement process, or you can just have your character step onto the feet pads. There is a large spring under the feet pads. The idea is for the weight of the victim will slowly compress the spring and they will be impaled Slowly.The spring has some compression morphs and the footpad has some length/width morphs to help with posing if needed.
The built in impalement pole has a tapered impalement head with some built in spikes for added cruelty. The spikes can be hidden from view if desired.
Pose/Load files are provided for G8F and the Impalement figure. There are “before”, “mid” and “after” poses to show progression. Note:
Impaler 2: This is another unique implament device. It has 4 posable arm and leg chains to restraint your victim while the implament pose rises out of the ground at it’s base to begin the impalement process. The built in impalement pole has a tapered impalement head with some built in spikes for added cruelty. The spikes can be hidden from view if desired. If you wish to use a different impalement pole design, simply hide the pole and add one of the provided smart prop poles from the props library.
Pose/Load files are provided for G8F and the Impalement figure. There are “before” and “after” poses to show progression.
Impaler 3: This device raises and lowers your victim up into the air then lowers them on an impalement pole below. It has a posable and repositionable control panel with lever and a repositionable power box. The arm on the impaler moves up and down and has a length adjustable hook to hang the victims arm spreader bar on.
Impaler 3 Assembly: This setup combines the Impaler 3 and Pole Mount Slot figure. This setup has pose files provided for it. The idea here is for the victim to be raised and lowered onto the impalment pole on the pole slot, then the pole mount moves back to the end of the slot so another victim can be added and so on.
Pose/Load files are provided for the Impaler 3 figure and G8F in the pose library. There are “before”, “mid” and “after” poses to show progression.
Impaler 4: This is a phalic shaped impalement figure. It has a morph size/shape adjustable shaft, spiked collar and support bar.
Pose/Load files for the Impaler and G8F are provided with “Before” and “after” progression poses. There is also a pose file provided in the event you want to use the leg spreader bar.
Impaler 5: This is a modern take on the wooden impalement pole. It’s got a thick, sharpened wooden shaft which your character is placed on and a modern metal floor mounted base. There are size/shape morphs on the wooden pole. Pose/Loadfiles are provided for the Impaler 5 figure and G8F in the pose library. There are “before”, “mid” and “after” poses to show progression.
Lifter: This is a simple lift device you can use to raise and lower your characters onto the impalement poles. It’s got size and shape morphs and a morph to lift the platform up and down. You can use the lifter with the pole mount poses, just move your character up and down via their hip and adjust the lifter height morph as needed.
Pole Mount Slot: This figure is a long metal slot that holds a Pole Mount in it. The idea is to be able to slide the mount back to the end of the slot so you can add more mounts. Kind of an assembly line look and feel of impalements. There are some morphs on the pole mount to help it fit into the slot better. You can add any of the 3 impalement poles smart props from the props library.
Poses for G8F are provided in the Pole Mount Poses library.
Pole Mount Slot Assem: This is the Pole mount slot with 5 additional Pole Mounts added to it. You can use this to add your impalement poles of choice and affix several G8Fcharacters and pose them “assembly line” style. Poses for G8F are provided in the Pole Mount Poses library.
Wall 1: This is a simple stand alone wall figure that can be used as a wall to attach the Gallow for Impalement figure to or just simply use it as a backdrop. It has width and height morphs.
Basic Iron Cuffs:
G8F – G8M: These are for G8F and G8M figures.
These libraries contain smart prop cuffs to use in conjunction with the most of Davo’s packages. These smart props will automatically
position and parent to your characters. To apply the cuffs, click on your character in the scene, then click to add each cuff or all,
they will position automatically.
Impalement Pack props library:
The Impaler 1, Impaler 2, Pole Mount and Pole Slot folders: contain the smart prop impalement poles that will work with each of those respective figures. If using Impaler 1 or 2, the already built in pole will automatically hide in applying a new pole of choice.
Spreader Bars folder: contains a smart prop arm and smart prop leg prop. Pose files are provided in the pose library to use with the arm and leg props in a “before” and “after” progression of poses. Those poses are available in the Impalement Pack/Arm Leg Spreadbar Poses library folder.
Armbar: This spreader has some morphs for showing the connecting hook (hidden inside the spreader by default). It also has an overall width morph and a morph to make the wrist cuff hooks longer.
Legbar: This spreader has size/shape morphs to adjust the base hole diameter and length, spreadbar width and ankle cuff hooks angle.
Poses are provided for G8F to be used in conjunction with each of the impalers and pole mount. Some poses will not affect G8F’s arms. The reason is because you may want to use the arm spreadbar rather than slack arms.
The Generic Arms-Legs folder in the Pole mount poses folder has some slack arm poses if you want to use them. This folder also contains some different syle poses to use for G8F if you don’t want to do
traditional vaginal to mouth impalement poses.
Readme File: A more detailed readme file is included with the product zip file.
– PC compatible
– Not tested in Mac
– Requires DazStudio 4.11+
– Poser 8+ Only version is available with V4 support (sold separately)
– All files in .duf, .dsf, .png and .jpg format.
– Basic G8F for poses
– Basic G8M for cuffs
Download File: Terminus 5 “Impalement Pack” For DS 4.11+